Comments on: SEMI-Blank LEED AP Exam Study Guide

By: liz

liz — Wed, 24 Jun 2009 16:18:15 +0000

Unable to download your pdf. How do I become a register user in order to be able to access any downloads?!?

By: Rachana

Rachana — Sun, 14 Jun 2009 23:02:57 +0000

Hi Pat,

I am a bit terrified now – about LEED as i realized the book that i was referring too for LEED NC is v.2.2 but Sept 2006 version – which apparently is different from the 2007 version – is there a place to see what the differences are? and am i going to be way-off since I looked at v2.2 ‘06 Guide?

helpppp pleaseeeee
nervous and tensed
rachana

By: Chirali

Chirali — Mon, 18 Aug 2008 23:42:05 +0000

Mitchell,

Thanks so much for the information.

By: Mitchell

Mitchell — Mon, 18 Aug 2008 14:36:19 +0000

Chirali,

Technically, I guess it MIGHT be possible to pass with just the information on the website, but I have never heard of that happening. Check the ‘What to study’ tab at the top of the website, I would recommend getting both the reference guide and the colorado study guide.

By: Chirali

Chirali — Sun, 17 Aug 2008 05:05:34 +0000

Hey,
I am new to everything about LEED and have a very basic query. With no offense meant, I want to know if the material available on this site is sufficient for the exam preparation? Is there nothing else required at all?
would e really glad and thankful if you could please answer this query of mine.
Thanks!!

By: mr. matt

mr. matt — Tue, 29 Apr 2008 12:46:08 +0000

pat,

i am starting to study for LEED and found a few items on this list that did not appear to be correct to me under the Code or Standard portion:

SSP1: I did not see NPDES referenced, rather NTIS. Did not see EPA 2003 as you reference rather just EPA.

SS1: Missing Endangered Species List. Missing Wetlands reference. I did not see CFR or Clean Water Act as you reference.

SS4.3: There is no standard as you reference.

SS4.4: Missing the Oregon Zoning Code.

EAP3: I did not see where Montreal Protocol was referenced.

EA1: Option #3 is missing whereas Benchmark 1.1 is actually Option #4.

EA2: is an ASHRAE standard not CBECS.

EA4: I did not see where Montreal Protocol was referenced.

EA6: has a standard- Center for Resource Solution’s Green-e Product Certification Requirements.

EQ2: should be “CIBSE” not “CUBES

EQ5.2: should be 52.2-1999 not 52.1-1999.

hope this help. thanks for the work.

By: Pat

Pat — Mon, 03 Mar 2008 05:36:16 +0000

Hi bharanidharan,

I’m glad you’re interested in LEED. For exam procedures, download the “LEED AP Handbook” on the right hand side of this webpage – under resources. There you’ll find everything you need to know about exam procedures. Let me know if you have any more questions.

Cheers!

By: bharanidharan

bharanidharan — Mon, 03 Mar 2008 05:03:53 +0000

i like to know the leed exam procedures

By: Pat

Pat — Sat, 01 Mar 2008 16:54:36 +0000

Updated! Thanks RW. Good luck studying!

By: Pat

Pat — Sat, 01 Mar 2008 03:38:07 +0000

Whoa, my mistake. I’ll work on those tonight and get a fresh version out by morning. I apologize for that!

Thanks for the great catch rw. This is very much appreciated!

By: rw

rw — Sat, 01 Mar 2008 01:56:21 +0000

Pat I found a few things that may need correcting…
-The codes (ZEV) & (ACEEE)- listed for SS5.1 (site development)-don’t those belong under SS4.3 (Alt. Trans/Low-Emm. & Fuel Eff. Vehicles) instead?
-Extra Credit for MR3.1-3.2 (Material Reuse) is 15%,not 40%.
-Code for EQ P2 (Env. Tobacco Smoke Control) is ANSI/ASTM E779.03.
-Code for EQ3.2(Constr.IAQ Mgmt Plan, Before Occupancy) is US EPA-”Compendium of Methods for the Determination of Air Polluttants in Indoor Air”-not SMACNA or ASHRAE.

Thanks again for putting this all together!

By: rw

rw — Sat, 01 Mar 2008 01:21:56 +0000

This is great Pat- Thanks for putting all this information together on one site. It is very complimentary to studying from the LEED NC v2.2 book.